Fiberglass Roving for Pultrusion

ECR-Glass Fiberglass Roving for Pultrusion

 

ECR-glass fiberglass roving for pultrusion is desgined and manufactured by Sichuan Chang Yang Composites Company Limited which coated with silane sizing and compatible with unsaturated polyester resin (UP resin), vinylester resin (VE resin), epoxy resin (EP resin) and phenolic resin, etc. Due to its high mechanical properties, multiple resin compatibility and good abrasion resisitance properties, it is widely used to produce pultrusion profiles and customized pultrusion FRP (Fiberglass Reinforced Polymer) products, such as sucker rods for oil recovery, cable trays, ladders, beams, rods, rebars, tubes, gratings, poles and sheets, etc.

Type of glass

ECR-glass

Filament diameter (um)                   

13-24

Linear density (Tex)

300, 600, 800, 900, 1100, 1200, 2400, 4400, 4800, 8800, 9600                                 

 

 

Product Proeprties:

a. Excellent mechanical properties

b. Complete & fast wet-out in resins

c. No fuzz with even tension

d. Good Abrasion Resistance

e. Excellent Electronic Performance

 

Technical Parameters:

Linear density

Filament diameter

Moisture content

LOI

±5%

±1um

≤0.10%

0.55±0.15%  

 

Packing:

The spools of fiberglass roving is packed with heat shrinkage plastic film or PE stretched film and then put it into cardboard carton or onto pallet. Each fiberglass roving spool weight is around 18~20KGs and maximum is 24KG. The stadnard pallet is packed 48 spools or 64 spools.

The most ecomomy way of shipping fiberglass roving is loaded by 20'FT container which can load 20 pallets and the net weight is around 18~20MT.

Bobbin height (mm)

260

Bobbin inside diameter (mm)

160

Bobbin outside diameter (mm)

270

Bobbin weight (kg )

15-21

Number of layers

3

4

Number of rolls per layer

16

Number of rolls per pallet

48

64

Net weight per pallet (kg)

720-1008

960-1344

Pallet length (mm)

1140

1140

Pallet width (mm)

1140

1140

Pallet height (mm)                                                      

955                            

1220                      

 

Storage:

Fiberglass roving should be stored in its original packing in a dry and cool place. Best conditions are at temperatures from 15℃ to 35℃ and humidity between 35% to 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet.

 

 

 

Products

Fiberglass Roving

Contact Supplier
Change Language

Select Language